Produkti

AIRCRAFT FRAME  
Diagonal Wheelbase 1520 mm
Frame Arm Length 625 mm
Dimensions 1471mm x 1471mm x 482mm (arm unfolded, without propellers)
780mm x 780mm x 482mm (arm folded)
PROPULSION SYSTEM  
MOTOR  
Stator Size 60mm x 10 mm
KV 130 rpm/V
Max Thrust 5.1 kg/rotor
Max Power 770 W
Weight (with cooling fan) 280 g
FOLDABLE PROPELLER  
Material High-performance engineered plastics
Diameter / Pitch 21x7.0 inch (533x178 mm)
Weight 58 g
ESC  
Max Allowable Current (Continuous) 25 A
Operating Voltage 12S LiPo
Signal Frequency 30 to 450 Hz
Drive PWM Frequency 12 kHz
SPRAY SYSTEM  
LIQUID TANK  
Volume 10 L
Standard Operating Payload 10 kg
Max Battery Size 151mm x 195mm x 70mm
NOZZLE  
Model XR11001
Quantity 4
Max Spray Speed 0.43 L/min (per nozzle, for water)
Spray Width 4 - 6 m (4 nozzles, 1.5 – 3 m above the crops)
Droplet Size* XR11001: 130~250 μm
*Droplet size may vary according to operation environment and spraying speed.
FLIGHT PARAMETERS  
FEATURES  
Total Weight (without batteries) 8.8 kg
Standard Takeoff Weight 22.5 kg
Max Takeoff Weight 24.5 kg (@ sea level)
Max Thrust-Weight Ratio 1.81 (with 22.5 kg takeoff weight)
Power Battery DJI Designated Battery (MG-12000)
Max Power Consumption 6400 W
Hovering Power Consumption 3250 W (with 22.5 kg takeoff weight)
Hovering Time 24 min (@ with 12.5 kg takeoff weight)
10 min (@ with 22.5 kg takeoff weight)
Max Operating Speed 8 m/s
Max Flying Speed 22 m/s
Recommended Operating Temperature 0 to 40℃
REMOTE CONTROLLER  
FEATURES  
Model GL690B(Japan Only), GL658C
Operating Frequency 2.400 - 2.483 GHz
Max Transmission Range (unobstructed, free of interference) 1km
EIRP 100 mW @ 2.4 GHz
Built-in Battery 6000 mAh, 2S LiPo
Charging DJI charger
Output Power 9 W
Operating Temperature Range -10 to 40℃
Storage Temperature Range Less than 3 months: -20 to 45℃
More than 3 months: 22 to 28℃
Charge Temperature Range 0 to 40℃
REMOTE CONTROLLER CHARGER  
FEATURES  
Model A14-057N1A
Voltage 17.4 V
Rated Power 57 W